Voidmaster .STL Access

As part of your Voidmaster perks, you have access to a select number of pre-release miniatures and gameplay items. Included is the Novani Hak-99 Dragon, the Geminese M-70 Panther, the Feronian S-12 Adder, and the Empyrean M-18 Chimera. 

Also included are the ship bases for use with the miniatures, the accompanying Momentum Dials, and a small assortment of prototype ID and Target Lock tokens.

Instructions:

Although all components have been successfully test printed on an FDM printer, including both an Ender 3 and a Bambu X1C, we highly recommend that for the best results, you print the 4 included miniatures on a resin printer. The bases, dials, and tokens are ideally printed on an FDM printer. 

For best results with the bases, dials, and tokens, we recommend the following print settings, as used with a Bambu X1C:

Filament Used: Overture/Bambu PLA Basic
Nozzle Temperature: 220 C
Bed Temperature: 55 C 
Layer height: 0.2mm(any layer height will work)
Top Layers: 5
Bottom Layers: 3
Wall Loops: 2
Infill Density: 30%
Infill pattern: Grid
Print Speed: 200-300 mm/s(lower will still work)
Build Plate Adhesion: None
Ironing: On
Supports: Off

We also recommend that for the dials themselves, as well as the tokens, that if you are able, to print them with dual filaments. For best results, we suggest printing the bodies of the dials in white, and the numbers in black. The font on the tokens is large enough that most color combinations will work. You should print two copies of each token, as one is meant to be placed in a slot on the base, while the other is used to mark Target Locks and who they belong to. All base, token, and dial components should be printed on the longest flat, undetailed side, if they are not orientated that way by default. 

We generally recommend that the miniatures should be printed vertically, ideally with the nose pointing up, although your results may vary, and your best judgement may be better than anything we can suggest.

If you have questions, comments, concerns, or any issues with these files, reach out to rosalind@sublightgames.com, or contact us through our Discord #support channel, and we'll be more than happy to assist with any issues you have.

Disclaimer:

All included .STLs are not final products, and are subject to change. These files are provided for private use only. Distribution and resale of either the .STLs or any physical prints of the .STLs is not permitted.